Lin fire high-pressure fire extinguishing pumps to fight fire with water. Water is a common fire extinguishing agent, water extinguishing is an economical, simple and effective way. Fighting with water is mainly the use of water's large heat capacity, strong cooling effect, with the natural characteristics of flame suppression, thus reducing the fire so that it can be extinguished. However, in China's forest fires, water resources have not been fully utilized. So far, our country in the forest fire fighting is still mainly mechanical fighting, in order to extinguish large forest fires, must be used in large-scale man-sea tactics. This method is characterized by high cost, large loss, difficult operation, low efficiency, etc. Under the forest fire weather, it is difficult to play an effective control and prevention of fire, and it is very easy to cause casualties. Dingxin Wisdom Technology specializes in manufacturing forest fire fighting equipment.

Functional characteristics

1, long conveying distance, high head, conveying distance of 5-10 kilometers or more.

2, the water inlet filter head water quality filtration, in the water containing sediment, impurities can be used normally . In the creeks, ponds, lakes and other water sources, as long as the water belt is sufficient, the water can be sent to the point of fire, play a role in fighting fires with water;.

3、Strong self-priming ability: vertical height>7 meters, the pump can run unloaded, improve the safety of the use of water pumps;.

4, can adapt to a variety of climates: in high temperature and high cold areas can be used normally.

5, high efficiency, in the transport distance of 8-10 kilometers, head 500-600 meters, the efficiency can still reach more than 90%.

6, long service life, significant economic benefits: the mechanical part of the pump does not come into direct contact with water, the use of plungers to promote the pressurization to achieve the function of suction and drainage greatly extends the service life of the pump.

7, water-saving effect is remarkable: the pump can adapt to the size of the fire trucks and other different tanks equipped with volume, is the ideal fire pump for forest firefighting.

8, high-pressure fire pump specially customized high-pressure fire hose, diameter 25-40, working pressure of 50 kg, burst pressure of 150 kg, surface polyester filament, lined with imported rubber, to meet the pump on the belt pressure requirements; customized high-pressure forest fire fighting interfaces, in the vertical height of 500-600 meters to ensure normal use.

Specification

Model: DX-YJS100-B85L

Size: 55*68*72cm

Weight: ≤60KG